1965 Factory Five Shelby Cobra

This car is absolutely Amazing and a Total blast to drive! Powered by a Ford Motorsports 5.0L coyote V8 and a Tremec 5-speed Manual transmission. The body is Factory Five Racing MK4 and Frame is Factory Five Original Style 4" Round Tube Frame. This is a Newly completed car completed and title in 2020 and has been on Display in our Museum collection since finished. The car has 78 miles on it and is 100% turn key, complete, dialed in and ready to go!

Here’s a list of what makes this Mk4 a perfect driving machine!

Frame:

• Complete jig-welded original style 4” round tube frame.

• 3-point roll bar

• Chassis powdercoated

Body:

• Hand laid 3/16” laminate composite body and panels made with vinylester resin.

• Driver and passenger doors with molded door liners and integral steel door frames

• Hood with molded hood liner, and separate hood scoop

• Trunk with molded trunk liner and improved mount face for license plate light

• secondary body fasteners

• Adhesive backed and foam weatherstrip

• C-channel door edge trim and fasteners

• Plastic end caps and body fasteners

• Trunk and engine bay seal, push on rubber bulb seal

• hood and trunk bumpers

• multi-adjustable door hinges with bronze bushings and fasteners

• adjustable hidden trunk hinge kit, hinge mount plates and fasteners

• Original quick-jack comp bumpers with stainless steel sleeves and fasteners

• Chassis Aluminum Panels:

• Over 40 laser cut, pre-formed 6061-T6 aluminum panels for cock pit, trunk, and engine bay.

• MK4 aluminum cockpit with optional block-off plates and covers

• Engine bay aluminum assembly with aluminum nose sections and splash guards

Complete Front Suspension:

• Unequal length A-arm control arms with coil-over shock suspension.

• KONI brand high-performance mono-tube, rod-end shock absorbers

• Coil-over kit for KONI dampers including spring hat, threaded seat and 500 lb. black powder coated springs

• Adjustable upper control arms with ball joints and fasteners

• Lower tubular control arms with ball joints and fasteners

Rear Suspension:

• 3-link rear suspension option include rear axle brackets, fasteners and axle straps to mount your Mustang 8.8” rear solid axle and brakes.

• KONI brand high performance mono-tube, rod-end shock absorbers

• Coil-over kit for KONI dampers including spring hat, threaded seat and 350 lb. black powder coated springs

• Factory Five tubular rear lower control arms with polyurethane bushings and fasteners

Brake Kit:

• SN 95 style spindles with integral upper ball joint mount and fasteners

• Front hubs, fasteners and dust covers

• Front Brakes, Ford Mustang GT 11” front rotors with twin piston PBR aluminum calipers, brake pads and fasteners

• Master cylinder with stainless braided brake lines front with mount clips, banjo bolts and brake line mounting fasteners

• Pre-flared 3/16” brake line and brake line T-adapter

• Complete emergency brake handle assembly with leather boot and fasteners

Complete Steering System:

• Complete steering system using 15:1 manual rack from tie rod ends and fasteners to vintage steering wheel and badges; collapsible design.

• 15:1 manual steering rack with inner and outer tie rod ends and fasteners

• Polyurethane steering rack bushings and fasteners

• Rack shaft adapter 9/16-26 spline

• Nickel plated lower steering shaft (fully welded U-joints)

• Collapsible upper steering shaft, with friction washers

• 14” vintage wood and aluminum steering wheel with boss and FFR center section and fasteners

• Steering bearings and hardware, including flange bearing, pillow block bearing and fasteners

Complete Fuel System/Parts:

• OEM style fuel tank with mounting straps and hardware, vents, gaskets, pick-up and fuel level sending unit

• Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high-press flex lines and fasteners

• Aston LeMans style polished aluminum fuel cap with integral pressure cap, gaskets, ground strap, fuel hose to tank with fasteners

• Fuel line, fuel filter, and connectors

Complete Cooling System/Parts:

• Electric cooling fan and mounting hardware, radiator hoses, and fasteners.

• Electric cooling fan and mounting kit

• Aluminum radiator with cap and in-line filler neck

• Radiator mount kit and fasteners

• Stainless steel radiator hose kit including adapter kit, fasteners and hose

• Stainless overflow tank with cap, hoses, hose clamps and mounting hardware

• 185 degree thermostat switch and wiring

• Engine Accessories/Side Exhaust:

• 4-into-1 side exhaust, bare steel with rubber hanger brackets, gaskets and fasteners

• J-pipe header-to-side exhaust adapter, optional catalytic converter replaces this part. Full tubular headers are also an available option

• Oil filter relocate kit with fittings, hoses, barbs and fasteners (J-Pipes Only)

• Accelerator cable assembly

• Full length tubular headers 

• Gauges, Dash, and Electrical Assembly:

• Integrated harness and electronic gauges. Vintage gauges and complete covered aluminum dash, dash buttons, toggles and indicator lights, switches, and horn.

• MK4 pre-cut aluminum dashboard with fasteners

• Padded dash cover, black vinyl

• Custom fit chassis wiring harness

• Ignition switch, headlight switch, three-position turn signal switch, starter solenoid and horns

• Red, green, and blue dash lights

• Wiring harness mounting kit and hardware includes fuse panel mount

• Insulated line clip hardware and fasteners

• Cable ties, wire loom and flex grommeting

• On/off switch, horn button, flasher and all connectors

• Battery ground strap

• Trunk mount battery hardware, cables and hold-downs with fasteners.

• Speedometer sending unit, pigtail, fasteners and speedometer gear

• seven vintage FFR replica electronic gauges

• GPS Speedometer (reverse read)

• Tachometer

• Oil Pressure Gauge

• Water Temperature Gauge

• Fuel Level Gauge

• Voltmeter

• Clock

Complete Interior Accessories:

• The MK4 has Authentic style seats, door latches, toggles, rear view mirror, and more complement the dash and gauges assembly for a full interior that is period correct.

• Authentic style roadster metal framed seats, black vinyl with fasteners

• 5-point Simpson brand harnesses. 3” wide driver and passenger, frame mounted with fasteners

• Complete cockpit carpet set, black all-weather

• Emergency brake boot, black leather

• Authentic interior rear view mirror with fasteners

• 7-piece electronic gauge assembly

• Original style door latches, fasteners and leather check straps

• Authentic stainless shifter handle, shift knob, boot, polished ring and fasteners

• Authentic 14” wood and aluminum steering wheel (listed in steering assembly), with polished aluminum boss and small center badge

Exterior Accessories and Lighting:

• Along with the goodies on the inside of the car, the MK4 is loaded with the right parts on the outside.

• Authentic chrome-on-brass vintage windscreen, tinted with side bars and fasteners; DOT safety glass compliant

• Authentic style three-lock set including T-trunk handle, L-shaped hood handles, matching keys, cam wedges, fasteners, latch pin sleeves and plastic end cap

• Authentic license plate light and bracket with fasteners

• Authentic style 3.5” Aston roller gas cap, polished cast aluminum with adaptor kit and all fasteners

• High-quality laser-cut aluminum side louvers

• Original style headlamp assemblies, including buckets, halogen headlamps, trim rings, and fasteners

• Original style British front amber turn signals, and red rear tail-lights

• All lighting is DOT-approved

• Authentic bullet style sideview mirror

Pedal Box and Components:

• The MK4 utilizes the proven Wilwood brand pedal box with fasteners and all the required ancillary parts

• Wilwood pedal box with adjustable pedals and mounting hardware

• Master cylinders, clutch quadrant, clutch cable, threaded firewall adjuster

• Accelerator pedal, accelerator cable, return spring and ball stud retainer, with fasteners

• Brake line adapters and T-fittings

Fasteners:

• More than 1,500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners